Download Response Electronics CL6011B Specifications

OUTPUT
TRACK
LOGIC
CE4.2:CL6211
OPERATE
DISCRETE SIGNALS
CONTROLLER
CURRENT
OUTPUT
INCREASE OPEN/CLOSE (T)
Bias and Gain Controller Block Diagram
VALVE
ACTION
S
ANALOG SIGNALS
TUNE
SS
(O)
IVP (0)
IVP HIGH LIMIT (T)
IVP LOW LIMIT (T)
IVP
LIMITS
S
TO OPERATOR
STATION
BIAS
DISPLAY
TO OPERATOR
STATION AND
DATA HIGHWAY
TO DATA
HIGHWAY
TO
OPERATOR
STATION
TO DATA
HIGHWAY
BIAS
VALUE
TO DATA
HIGHWAY
BIAS VALUE (O)
TO OPERATOR
STATION AND
DATA HIGHWAY
MODE CONTROL
FROM CONSOLE
OR DATA HIGHWAY
RESTART LAST
MODE? (C)
RESTART MODE (T)
MODE (O)
YES OR NO (C)
RAMP TIME (T)
MODE
LOGIC
YES OR NO (O)
TRANSFER
RAMPING
S
(T)
SS
TO DATA HIGHWAY
S
OUTPUT TRACKING/
NORMAL? (O)
SS
CONFIGURE
YES OR
NO (C)
RESTART
IVP (T)
S
MANUAL OUTPUT (O)
FROM CONSOLE OR
OPERATOR STATION
RESTART
LAST IVP
S S
NOTES:
S
S
OUTPUT
TRACKING
OUTPUT
TRANSFER
S
SP (O)
SP HIGH LIMIT (T)
SP LOW LIMIT (T)
TRIP POINT (T)
DEADBAND (T)
DEVIATION
ALARM
DEVIATION
ALARM (0)
S
TO OPERATOR
STATION AND
DATA HIGHWAY
SET POINT
LIMITS
REVERSE OR DIRECT (T)
DEVIATION
HIGH OR LOW (C)
TRIP POINT (T)
DEADBAND (T)
ALARM
B
ALARM B (0)
OR
ALARM B OR C (0)
ALARM C (0)
Figure 3Ć11Ć3. Bias and Gain Loop Point Block Diagram
(C)
S
INCREASE
OPEN/CLOSE (T)
S S
VALVE
ACTION
ADD
RAMPING
CONTROL
ACTION
S
LOCAL SET POINT (O)
FROM CONSOLE OR
OPERATOR STATION
YES OR NO (C)
RESTART SP (T)
S
SET POINT
TRANSFER
RESTART
LAST SP
BIAS VALUE (O)
RESTART LAST
BIAS? (C)
RESTART
BIAS (T)
GAIN VALUE (T)
S S
GAIN
BIAS
HIGH OR LOW (C)
TRIP POINT (T)
DEADBAND (T)
NOTE: ONLY ONE
DEADBAND MAY BE
SPECIFIED FOR ALL
THREE ALARMS.
ALARM
C
S SS
OUTPUT
TRACKING
OVERRIDES
MANUAL? (C)
TO OPERATOR
STATION AND
DATA HIGHWAY
PV (O)
PROCESS
VARIABLE
S SS
TRACK
CONTROL
TRACK
VALUE
3Ć32
Theory of Operation: Point Processing
S
Original Ć June 1990