1
Download EMS 7703 Programming instructions
Transcript
EMS 7000 IRIS + Once the settings are as above, click on the ‘ASCII Setup‘ button and check that the settings are as follows: - Once the settings are as above, click on the ‘OK’ button then on the next window click on the ‘OK’. We can now establish a connection by selecting ‘Call’ and ‘Call’ as below:- Once completed, HyperTerminal is configured. Please Note: To save future reconfiguration, the HyperTerminal session can be saved for future use. 7940 ENGINEERS GUIDE v2.2 – 13/04/10 13
