Download Crestron CEN-COM Specifications
Transcript
Ethernet RS-232/422 COM Module Crestron CEN-COM Apply power to the CEN-COM and notice that the Viewport window changes as communication is established with the CEN-COM, shown below. Activity in the Viewport Window Enter a question mark (?) and depress ENTER to display the setup menu, shown below. Main Menu in Viewport Window At the time of printing this Operations Guide, not all commands (listed in the leftmost column) in the main menu were fully implemented. The following subsections provide a brief description of each. Command entry is not case sensitive. The user only needs to enter the characters of a command that make it unique from another (i.e., for the add_master command, the user only needs to enter “add_m”). add_master Entering the “add_master” command provides a list of IP addresses (masters) from which the CEN-COM will accept commands. Refer to the sample Master List shown after this paragraph. There are five static IP addresses which are stored in nonvolatile ROM. Also, there are three dynamic IP addresses which are not permanently stored and can therefore be lost after a power cycle. 8 • Ethernet RS-232/422 COM Module: CEN-COM Operations Guide - DOC. 5719