Download Schaerer Celebration BC Technical data

Transcript
www.schaerer.com
4. System test / calibration
Parameter / Menu
Procedure
Explanations & Remarks
4.4. Move brew piston
►► Press to move the brew piston downwards.
Down
►► Press to move the brew piston upwards.
Up
►► Press to move the brew piston to its origin position (home
position).
Starting (home) position
IMPORTANT REMARKS:
●● During “Move brew piston” the current
monitoring is not active!
●● Do not move the brew piston to long
onto the end point! The brew motor can
get damaged!
4.5. Calibrate grinders
Grinder
Grinder left
Reference grinding
20.0gr.
►► Select the grinder which should be calibrated.
Grinder calibration must be done after:
●●
●●
●●
●●
●●
●●
►► Set the amount of the reference grind (procedure see
below).
;; Standard value is 20.0 gram.
Exchanging the grinding discs;
Exchanging the grinder motor;
Exchanging the (complete) grinder;
Adjusting the grind level;
Changing the CPU;
Updating the software;
This value has to be adjusted after reference grinding!
►► Press “Start reference grinding” to start the process.
;; The grinder is working for 10 seconds.
Start reference grinding
►► Repeat the process for approximately 3-5 times.
;; Enter the weighted amount in the menu “Reference grinding” (see above).
►► Press “Stop (xx.xx)” to end the process.
Stoppen (xx:xx)
–
–
Procedure for grinder calibration
►► Bridge the position switch on the front door.
►► Place a cup between the brew unit and the grounds container.
►► Press “Start reference grinding”.
;; The grinder is working for 10 seconds.
Start reference grinding
–
►► After the grinding has ended weigh the amount using a
digital balance.
►► Enter the weighted amount in the menu “Reference
grinding XX.X gr.”.
4.6. Grinding time adjustment
Grinding time adjustment
0.00%
Range: 0.00-4.00%
►► Set the grinding time adjustment.
After every hour of working time the grinding time will be increased about the entered
value.
Recommendation:
●● Not active (value 0.00%)!
Programming manual / V01 / 02.2010
33 / 62