Download Blade Network Technologies G8000 Technical data

RackSwitch G8000 ISCLI Reference
Port 802.1X Authenticator Diagnostics
Use the following command to display the 802.1X authenticator diagnostics for the selected
port:
show interface port {<port alias or number>} dot1x
Command mode: All
System Status: Disabled
Quiet
Tx
Max
Supp
Server
ReAuth
ReAuth
Port
Auth Mode
Period
Period
Req
Timeout
Timeout
Status
Period
--------------------------------------------G
force-auth
60
30
2
30
30
disabled
3600
1
force-auth
60
30
2
30
30
disabled
3600
------------------------------------------------------------------------G - Global port configuration
Table 3-4 802.1X Authenticator Diagnostics of a Port
Statistics
Description
Port
The port number.
Auth Mode
Displays the Access Control authorization mode for the port.
The Authorization mode can be one of the following:
„ force-unauth
„ auto
„ force-auth
Quiet Period
Sets the time, in seconds, the authenticator waits before transmitting an
EAPRequest/ Identity frame to the supplicant (client) after an authentication failure in the previous round of authentication. The default value is
60 seconds.
Tx Period
Sets the time, in seconds, the authenticator waits for an EAP-Response/
Identity frame from the supplicant (client) before retransmitting an EAPRequest/Identity frame. The default value is 30 seconds.
Max Req
Sets the time, in seconds, the authenticator waits before re-authenticating
a supplicant (client) when periodic re-authentication is enabled. The
default value is 3600 seconds.
Supp Timeout
Sets the time, in seconds, the authenticator waits for an EAP-Response
packet from the supplicant (client) before retransmitting the EAPRequest packet to the authentication server. The default value is 30 seconds.
BMD00128, September 2009
Chapter 3: Statistics Commands „ 73