Download Adaptec 9210LP Installation guide

9210IG.book Page 6 Monday, April 2, 2001 11:13 AM
Installation Guide
INSTALLING
THE
SFP
The Adaptec Fibre Card 9210LP optical interface requires the
installation of a Small Form Factor Pluggable (SFP) module for
the external connector interface before connecting the external
Fibre Channel cables. For more information about the SFP, see
the Adaptec Fibre Card 9210LP User’s Reference.
STEP 1
STEP 2
Install the SFP into the receptacle on the adapter.
Make sure the SFP fits securely into the receptacle.
NOTE You can only install the SFP one way, as the SFP and
guide rails inside the adapter receptacle are keyed.
6