Download SimMechanics Link User`s Guide

Transcript
3
First-Generation Examples
sharing a common plane, representing two translational DoFs. The constraint
also allows the two cubes to rotate about the x-axis. The cubes are not allowed to
rotate about any other axis, or to translate perpendicular to the y-z plane.
With these two constraints, the two cubes can only slide along the z-axis common to
the two upper concentric holes. The second constraint prevents rotation about this axis,
leaving the whole assembly with only one translational DoF.
Cylindrical and Planar Constraints on Two Cubes (SolidWorks)
Prismatic as Two Orthogonal Planar Constraints
To see the second way of constraining the DoFs to produce a prismatic joint:
3-12
1
Open the assembly file, prismatic2.ASSEMBLYFILETYPE, and examine its CAD
hierarchy.
2
Locate the two constraints on the two cubes.