Download ARRI Laptop Camera Controller flex LCC Specifications

2. Status Indicators
Viewfinder Indicators: END blinking: Film end coming up in X feet/meters (“X” can bet set by user)
END glows: Camera ran out of film
ASY:
Asynchronous operation; camera is not running at set fps rate
BAT:
Low battery (less than 20 volts). Exchange battery.
Display Indicators:
TC glows:
TC blinks:
bat:
asy:
end flashes
end glows:
fps flashes:
PROG glows:
Timecode exposure is enabled and timecode is set
Timecode exposure is enabled, but not recording properly
Low battery (less than 20 volts). Exchange battery.
Asynchronous operation; camera is not running at set fps rate
Film end coming up in X feet/meters (“X” can be set by user)
Camera ran out of film
ESU is not receiving a valid signal
Internal program is activated
Display Warnings:
The LCD Display will indicate any situations that will prevent running the
camera by changing one or more of its digits into underlines.
Magazine
improperly attached
ft
fps
Magazine
not ready
Magazine
communications check
0000
_000
Movement block
not locked
Film jam in
upper loop area
Sprocket guides
are open
Arriflex 535B Quick Guide, 4/99, Page 6
Film jam in lower
loop area, or film end