Download McDATA OPENconnectors Command Line Interace User manual

config
2
NOTE: The SANtegrity Authentication feature key must be installed to
configure the FCCT key.
Parameters
Command Example
This command has no required parameters.
Root> config security authentication interface osms
setKey
config.security.authentication.interface.serial.enhancedAuth
Syntax
Purpose
Parameters
enhancedAuth
enhancedAuthState
This command sets the enhanced serial authentication state.
Enhanced Serial Authentication requires users to enter a password
when gaining access to the serial port interface.
This command has one parameter:
enhancedAuthState
Command Example
This parameter enables and disables enhanced
authentication on the serial port interface.
Accepted values for this parameter are enable or
disable. Boolean 1 and 0 values may also be
substituted.
Root> config security authentication serial enhancedAuth
enable
config.security.authentication.interface.show
Syntax
Purpose
show
interface
This command displays the settings in the local authentication
database for a single interface.
NOTE: The SANtegrity Authentication feature key must be installed to view
the E_Port, N_Port, and OSMS information.
2-48
E/OS Command Line Interface User Manual