Download Cabletron Systems SmartSwitch 8000 User guide

Transcript
2 SWITCH INSTALLATION AND SETUP
After you read this chapter, you will be able to perform the following tasks:
U
U
U
U
Install the SmartSwitch 9A100 switch module into the SmartSwitch 9000 chassis
Complete the initial configuration
Use the console interface
Install the SmartSwitch ATM Administrator graphical management software
2.1
UNPACKING THE SWITCH
Remove the accessory carton from the shipping box. Carefully remove the switch from its packing material.
2.1.1
Check Accessory Carton Contents
Open the accessory carton and check that it contains the following items:
— 7-foot UTP cable terminated on both ends with RJ-45 connectors
— RJ-45 to 9-pin female adapter (labeled PC)
— Console cabling instruction sheet
— Diskettes containing switch software, MIB files, SmartSwitch ATM Administrator software, and release notes
— SmartSwitch 9A100 Release Notes
— SmartSwitch 9A100 Quick Start
— SmartSwitch 9A100 User Guide
— SmartCell 6A000/ZX-250 Reference Manual
If any of these items is missing, contact Cabletron customer support immediately.
SmartSwitch 9A100 User Guide 2-1