Download Datel Strata CIX Specifications

IP Telephone Programming
IP Telephone Installation and Network Connection Setup
FIELD
DESCRIPTION
03 Station IP Address
Enter the Station static IP Address if a static address is needed per Station IP
Address Type set in 02 above.
Possible values:XXX.XXX.XXX.XXX where XXX = 0 ~ 255
04 Auto Assign Station ID
Use Automatic when the IP telephone has no Station ID. Use 'Not Automatic'
when IP telephone has station ID in the IP telephone setting. In Program 150,
FB01 is the same parameter for system.
When 'Don't Care' is set, program 150-01 precedes in Program 250-04.
IP Telephone
Programming
Enabling Program 150-01 is equal to using 'automatic' in Program 250-04.
Disabling in Program 150-01 is equal to 'not automatic' in Program 250-04.
When the IP telephone requests to connect to a Strata CIX with no station ID,
the CIX searches for a PDN that is set in this parameter as 'automatic,' and send
the PDN to the IP telephone, and the IP telephone records it in the IP telephone
setting.
Possible values:Permitted, Not Permitted or Don’t Care (Default)
05 Station Terminal
Authentication Mode
Apply this parameter if you want to reserve a PDN for the IP Telephone
connected at the present time. When 'apply' is set, terminal authentication by
MAC address of the IP telephone is valid. So if another IP telephone which has
the same PDN is connected to the network, the CIX rejects the registration of
this IP telephone because the MAC address of the IP telephone is different.
When 'not apply' is set, you can move the PDN from an IP telephone to another
IP telephone and another IP telephone can be connected to the CIX. When
'don't care' is set, terminal authentication for this telephone is determined by
Program 150-02.
The Terminal Authentication setting 'Apply or Not Apply' in this program
overrides the Terminal Authentication any setting in Program 150-02
Possible values:Apply, Not Apply or Don’t Care (Default)
06 Station MAC Address
Station Media Access Control (MAC) Address. This address is hard coded
uniquely in each IP telephone. The MAC will only display if the IP telephone is
connected to the BIPU-M and is operating properly.
Possible values:Max 12 ASCII characters
07 Voice Packet Table
Select the Voice Packet configuration table that should be assigned to this IP
telephone (voice tables are configured in Program 152). When the G711 Audio
Codec is selected in 08 codec below, the default values in Program 152-01,
Table 1 should be used. When the G.729A codec is selected in 08 Audio Codec
below, the default values in Program 152-01 Table 2 should be used.
Important: When switching the IP telephone from the G.711 to the G.729 codec
(the first time), the CIX will automatically switch the Voice Packet table from
Table 1 to Table 2.
Possible values:1 ~ 128
Strata CIX Programming 05/08
8-15