Download Sharp SD-EX220 Operating instructions

SD-EX220
System connections
„ Speaker connection
FM antenna
AM loop antenna
z Make sure to unplug the AC power cord before connecting the speaker
wires.
z Connect the speaker wires to the speakers first, then to the unit.
This prevents short circuit between and terminals.
Connect the wire with the gray line to the minus (-) terminal and the white wire
to the plus (+) terminal.
Right
speaker
Left
speaker
Left speaker
Right speaker
- System connections -
Preparation for Use
White
Gray line
Gray line
White
1
2
3
White
Gray line
Caution:
How to open side covers
Open the right and left side covers to connect the system.
z Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit.
z Do not mistake and , and right and left terminals of the speaker wires. (The right
speaker is placed on the right when you face the unit.)
z Do not let the bare speaker wires touch
Incorrect
Incorrect
each other.
z Do not short-circuit the speaker wires. If
the power is turned on, malfunction may
occur.
z Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
z Do not stand or sit on the speakers. You may
be injured.
Note:
Place speakers with the tweeter on the outside (see diagram).
Tweeter
Tweeter
12
03/6/19
SD-EX220(U).fm
TINSE0560AWZZ