Download Sharp SD-EX220 Operating instructions

SD-EX220
„ Programmed play
Adding tracks to the program:
You can choose up to 20 selections for playback in the order you like.
1
2
Press the
button.
Press the MEMORY button to enter the programming save mode.
If a program has been previously stored, the "MEMORY" indicator will be displayed.
Then follow steps 1 - 5 to add tracks. The new tracks will be stored after the last track
of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or
Each time the button is pressed, track numbers will be displayed in order.
3
button.
Press the direct buttons to select the desired track.
Playback order
Playback time
You can program the track by pressing the MEMORY button after selecting it
with the
or
button.
4
Repeat step 3 for any other track. Up to 20 tracks can be programmed.
5
6
Press the
Press the
button.
button to start playback.
CD Playback
3
z Ejecting a CD automatically cancels the programmed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by mode or the
function is changed from CD to some other, the programmed selections will not be
cleared.
z During program operation, random play is not possible.
z Programmed tracks will be erased if the unit is unplugged or a power failure
occurs.
- Advanced CD Playback -
Notes:
To clear the programmed selections:
Press the CLEAR button while the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last
track programmed.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the CLEAR button
on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared.
21
03/6/19
SD-EX220(U).fm
TINSE0560AWZZ