Download Scion BeSpoke Owner`s manual
Transcript
The BeSpoke app BeSpoke Premium Audio PART NO. PT546-18130 BeSpoke Owner’s Manual Requirements Getting Started Requirements for using BeSpoke with this unit: Apple iPhone 4 or 4S. Connection to the Internet via 3G, GSM/EDGE, CDMA or Wi-Fi network Download the latest version of the free BeSpoke app by going to the Apple iTunes App Store and search for "BeSpoke". Once installed, launch the app and create your account, then connect your iPhone with the cables provided. (see detailed information on the next page.) BeSpoke uses an app on your iPhone that is displayed on the screen in your car. BeSpoke lets you do the following and more: • Listen to Internet Radio and share your favorite stations with friends • Check friends’ Facebook updates • Create routes to destinations and friends • Display Twitter/Facebook friends on maps • Use voice to control the app • Search for destinations and share the results with friends To use this unit, first download the BeSpoke application to your iPhone and register for a Zypr account, and then connect the iPhone to this unit. (See detailed information on the next page.) 1 How to Connect your iPhone Connect the iPhone as indicated in the figure below using the cable provided. 1. Remove any headphones connect to the iPhone 2. Push the dock connector into the dock connector port until you hear a click to connect firmly. If it does not go in smoothly, it may be upside down so do not force it in as this may result in damage. 3. Connect the USB cable into the vehicle's USB port 4. Connect the cable's audio jack into the jack port 5. Once connected, the iPhone will automatically turn on, and will indicate that an accessory has been connected to the iPhone iPod (iPhone) with Dock connector port USB port Dock connector To the vehicle's connector *1 Jack port 2 *1 Connection location differs depending on the vehicle. Vehicle type tC xB xD iQ FR-S Connection location Connect to the connector near the shift knob. Connect to the connector near the parking brake. Connect to the connector near the cup holder. Connect to the connector near the shift knob. Connect to the connector near the shift knob. IMPORTANT • When the ignition switch is set to ACC or ON, the iPhone’s battery is charged while the iPhone is connected. • You cannot use the iPhone’s remote control while the iPhone is connected. • You may hear noise if you disconnect during iPhone playback. • If there is a problem with the screen display, disconnect and reconnect the cable. • The iPhone should not be locked. • To resolve most problems when using your iPhone with this unit, disconnect your iPhone from the vehicle iPhone connection and reset it. • For instructions on how to reset your iPhone, refer to the User Guide of your iPhone. • Connect the Dock connector directly to the iPhone with Dock connector port. Do not connect it via the iPhone Dock or other connection. • When the iPhone is connected to this unit, sound will also be heard from the headphone of the iPhone. • Disconnect the headphone from the iPhone before use. • Content and usability may change over time. Please check our website at www.scion.com/bespoke. How to change the alert style from “Alerts” to “Banners” 3 Touch [Banners]. How to connect Bluetooth 1 Touch [ ] then [Bluetooth] to display the setting menu. Change the alert style from “Alerts” to “Banners” on the iPhone settings screen. 1 Touch [Notifications]. 2 Touch [Connect Phone] to pair your Bluetooth hands-free phone. 2 Touch the item you want to configure the alert style for. Repeat steps 2 and 3 to convert the alert style of all the items from “Alerts” to “Banners”. 3 Touch [Add New] to connect your Bluetooth hands-free phone. 3 iPhone setting 3 Touch [Services]. 1 Touch [Location Service]. 4 Touch [Location Reporting]. 2 Switch [Location Service] to ON. 3 Switch [BeSpoke] to ON. BeSpoke app setting 1 Launch BeSpoke app. 2 Touch [ ] on your iPhone. Bluetooth hands-free phone connection is complete. 4 5 Select Location Reporting. For more details about the Location Reporting setting, refer to the “About location setting” section on page 28. Quick Start each POI. POI search results can be shared using Twitter's direct mail service. Cell Phone Reception: OFF Current Location • Using Voice Routing Cell Phone Reception: ON Scion’s Internet Radio Social Network Service Other Internet Radio Stations POI Search Routing Initiates Voice Recognition Zoom In Level Zoom In / Out • Listening to Internet Radio Touch [ ] to listen to and enjoy Internet Radio. Touch [List] on the displayed screen to pull up a genre list from which you can select a favorite station. The Internet Radio station can be shared with friends using the direct mail service on Twitter. Touch [ ] to pull up a station list of Scion Audio Visual stations from which you can select a favorite station to play. Return to North / Current Heading Up Location • Checking Twitter/ Facebook Touch [ ] to access the Timeline on Twitter and the News Feed on Facebook. You can also use this function to check the Tweets and Feeds of registered friends in the list. The location of friends who are disclosing their location will be displayed on the map. • Searching for Points of Interest Touch [ ] to pull up a genre list that you can use to search for POIs. You can display POI search results on the MAP, and create routes to Touch [ ] on the right side of the screen to pull up a map and direction list. Touch a balloon or direction from the list to start audio guidance. You can find routes for destinations easily using the list of recents. • Using BeSpoke's Voice Recognition Touch [ ] to activate function control using your voice. Start talking after the beep stops. If another Bluetooth audio device in addition to iPhone is connected, Voice Recognition may not work properly. If so, please set Bluetooth audio to the iPhone only. * The following voice control functions are available: Playing Internet Radio. Getting Status Updates (Twitter/ Facebook) Sending direct messages Searching for friends Searching for POIs 5 Searching for routes * A Bluetooth connection is needed in order to use voice control. * Touch [ ] on your iPhone and then use [Help] to check the operating procedures for each icon. (When iPhone is disconnected.) * For more details, please visit our website at www.Scion.com/BeSpoke. * Operational procedures may differ depending on the version of the application being used. 6 How to Use BeSpoke (Touch Operation): 3 Touch the listing for your favorite genre. The following instructions assume that the iPhone is connected to the car and the BeSpoke app has been launched. How to listen to Internet Radio • Play and stop 1 Touch [ ]. 2 Touch [ ] to display the Internet Radio screen. • Choose by Genre 1 Touch [List] to display the Internet Radio Service Provider Search screen. 2 Touch [Tuner2 - Genre] to switch to the Genre Search screen. The list of the Internet radio stations within the selected genre will appear. The station you select will begin playing automatically. To add the current Internet Radio station to your Favorites, touch [+Fav]. 7 To remove the current Internet Radio station from your Favorites, touch [-Fav]. How to show friends on the map 1 Touch [ ]. Touch [ ]to return to the regular map screen. • Choose by Internet Radio service provider 1 Touch [List] to display the Internet Radio Service Provider Search screen. 2 Choose one of the following operations to suit your preference. • To select from the Internet Radio station recommended by Scion, touch [SCION AV RADIO]. • To select from the Internet Radio Stations you listened to recently, touch [Recents]. 2 Touch [ ] to display the MyFriends & Me list. 3 Select the friend whose current location you want to know. • To select from your favorite Internet Radio Stations, touch [Favorites]. 8 How to Search for a Local Business POI 1 Touch [ ]. 2 Touch [ ] to display the POI list screen. • Touch [favorite] to select from the list of your favorite POIs. 4 Touch [Map]. 4 You can perform the following operations on the Detail screen for the selected POI: 3 Select the POI you are searching for from the list. A balloon appears on the map, indicating the current location of your friend. If you cannot find the desired POI, or if you want to narrow the search list, do one of the following: • To select the desired POI by category, touch [Category] to display the Category screen. • Touch [Map] to display a balloon on the map that indicates the location of your POI. • Touch [Route] to display the route to the target POI on the map. 9 • Touch [+Fav] to add the POI to the Favorite list. • Touch [-Fav] to remove the POI from the Favorite list. • Touch [MSG] to send the POI information along with your message to your registered friends. How to send a direct message from the Twitter follower list 3 Select your Twitter follower from the MyFriend & Me list. 6 Select a message you want to send. 4 Touch [MSG]. 7 Confirm the message to send, and then touch [Send]. 1 Display the MyFriends & Me list. Refer to the "How to show friends on the map" section on page 8. 2 Touch either [ ] or [ ] to display Twitter followers. 5 Touch [Messages] to display the message sample list. 10 The direct message will be sent. How to send a direct message 1 Display the MyFriends & Me list. Refer to the "How to show friends on the map" section on page 8. 4 Select a Follow item you want to reply to. 7 Select a message you want to send. 5 Touch [Reply]. 8 Confirm the message to send, and then touch [Send]. 6 Touch [Messages] to display the message sample list. The direct message will be sent. 2 In the MyFriends & Me list, select your Twitter ID. 3 Touch [Direct Message] to switch to the Follow screen. 11 How to set a route from a balloon 1 Touch Balloon. • Touch [GO!] to set it as a destination. • To cancel, touch [Cancel]. It will not provide automatic turnby-turn guidance. 3 Touch [Route]. How to set a route to a Twitter follower 1 Display Twitter followers. 2 Touch [Route]. Refer to the "How to send a direct message from the Twitter follower list" section on page 10. 2 Select your Twitter follower from the MyFriend & Me list. 3 A route overview will appear. 12 You cannot select followers who are not sharing their locations. 4 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on this page. How to set a route to a location on the map 1 Touch the map and drag it to the area you want to set a route to. How to display a recent route 4 Select a route. 1 Touch [ ]. 2 Touch [ ] to display the maneuver screen for the currently-specified route. 2 Touch and hold the cross mark and the can set the destination route. 3 Touch [Recent] to display the list for the routes that you set recently. The selected route will be displayed. 5 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on page 12. 3 A route overview will appear. Refer to step 3 of "How to set a route from a balloon" section on page 12. It will not provide automatic turnby-turn guidance. 13 How to view status update on Facebook 1 To view status update on Facebook, display the MyFriends & Me list. Refer to the "How to show friends on the map" section on page 8. How to view Timeline on Twitter 1 To view Timeline on Twitter, display the MyFriends & Me list. Refer to the “How to show friends on the map” section on page 8. 2 Select your Twitter avatar from the MyFriends & Me list. 2 Select your Facebook avatar from the MyFriends & Me list. The Timeline screen appears. The News Feed screen appears. 14 How to Use BeSpoke (Voice Commands) When BeSpoke automatically detects the end of the spoken voice command, the following screen appears. 1 Touch [ ] on the map screen or Internet Radio screen. Search by voice recognition BeSpoke is listening for a voice command. For voice commands, refer to the "Voice commands list" section on page 18. 1 Say a ‘search’ voice command on the talk command screen. If the ‘search’ voice command is correctly recognized, the spoken command appears. • The search result appears on the map screen. After a beep, the talk command screen appears. 15 Playing Internet Radio Say a play Internet radio voice command. • When the Internet Radio is playing, the screen will display a genre, station list or specific station according to the command. A list of stations appears and voice commands are activated. How to send a message 1 Say a ‘send message’ voice command on the talk command screen. For the voice command screen, refer to the "How to Use BeSpoke (Voice Commands)" section on page 15. The spoken command appears. • From the displayed list, select and say the command number. • You can also touch [ ] and say the number to activate the voice commands. If the voice command is not clearly recognized, a list of candidates close to the spoken command appears, and voice commands are activated. When sending a message or searching a POI, BeSpoke waits for you to say the message or the name of POI. 2 Touch [ ]. After a beep, the talk command screen appears. • From the displayed list, select and say the command number. • You can also touch [ ] and say the number to activate the voice commands. 16 4 Touch [ ]. After a beep, the talk command screen appears. 3 When sending a message or searching a POI, say one of the following: • When sending a message, say the message you want to send, e.g. Hello. • When searching a POI, say the name of the POI, e.g. BeSpoke Cafe. When BeSpoke automatically detects the end of the spoken voice command, the recognized message appears. First use a 'send message to' voice command, then when BeSpoke confirms the command and indicates "Please send message text", dictate the message you want to send. 5 Check the recognized message and say one of the following: • If the recognized message is correct, say "Yes". • If the recognized message is incorrect, say "No". BeSpoke returns to step 2. When BeSpoke automatically detects the end of the spoken voice command, the recognized message appears. If the voice command is used on the Internet Radio screen, BeSpoke returns to the Internet Radio screen. 17 Voice Commands List Internet Radio Example voice command Explanation Show <genre> station Obtains the station list of the specified genre. Play <station name> Plays the specified Internet Radio station. Play Internet Radio Obtains a genre list of the Internet Radio. Show recent station Obtains the recently played list of stations. Stop the music Stops playing the station. Stop Stops the music. Play a random station Selects a radio station at random. Friend Example voice command Find <friend name> on the map I want to see <friend name> Explanation Searches a friend on the map. POI Example voice command Explanation Find <category name> nearby Specifies a POI category on the currently displayed map screen to search the surrounding area. Find local business Searches POIs in the surrounding area. Find business in <City> <State> Searches POIs in the specified city. Find <category name> in <City> <State> Specifies a city and searches the POI category. 18 Route Example voice command Explanation Route to <list number> Finds a route to the POIs displayed in the search results after a POI search. (Specifies a POI using a list number) Route to <friend name> Finds a route to a friend recognized by the application. Cancel routing Deletes the found route. Reroute to last destination Reroutes to the most recent destination. Message Example voice command Explanation Send <list number> to <friend name> Specifies a POI using a list number and sends information to a friend after a POI search. Send this station to <friend name> Sends the information on the currently played Internet Radio station to a friend. Show my messages This command is effective only when there is a new message. Reply to this message Replies to a message confirmed by the Show my messages command. Next message Shows the next message. Previous message Shows the previous message. Post a status update on Twitter Posts on Twitter. Post a status update on Facebook Posts on your Facebook feed. Send a message to <friend name> Sends a direct message to <friend’s name>. Send a message to <friend name> on Twitter Sends a direct message to <friend’s name> on Twitter. 19 Error Lists Server errors Message Sorry, taking a coffee break. Please try again later. Cause Attempted to retrieve information or execute a command, but was not able to complete it. Action (Reference) Wait momentarily and then retry the operation. Voice recognition error Message Sorry, I didn’t catch that. Please repeat it. Cause Unable to obtain voice recognition results from the Zypr server. Action (Reference) Repeat the voice command in a loud, clear voice. Unsupported errors Message Sorry, that command isn’t available. Please see Examples. 20 Cause BeSpoke does not support that voice command. Action (Reference) Refer to the Voice Command Guide, double check the corresponding command and then repeat the voice command. Message Sorry, I don’t recognize that item. Please try again. Sorry, I didn’t catch that. Please repeat it. Cause Action (Reference) Unsuccessful in obtaining information for pointing out the POI from the voice recognition results. Give the voice command after verifying the POI to be indicated. Give the voice command after verifying the number to be indicated. The POI designated by the voice recognition results – for which a search has already been carried out – does not exist amongst the POIs in the application. Give the voice command after verifying the POI to be indicated. Give the voice command after verifying the number to be indicated. Radio playback is not selected immediately after logging out, so the radio station could not be designated. Give the voice command after playing the radio. Unsuccessful in obtaining the information for designating the radio station URL from the voice recognition results. Give the voice command after doublechecking the radio station you want to designate. Unsuccessful in obtaining the information for designating the radio genre from the voice recognition results. Give the voice command after doublechecking the genre you want to designate. Friends and POIs for which routes are to be created and for which names and numbers were indicated were not recognized. (The names and numbers indicated are not consistent with the names and numbers maintained within the application.) Give the voice command after verifying the name and number of the item to be indicated. Unsuccessful in obtaining information for specifying message details from the voice recognition results. Give the voice command again. 21 Message Sorry, that location can’t be found. Please try again. Sorry, I don’t see that friend on your list. Please try again. Cause Because there is no location information regarding the friends or POIs for which routes are to be created and names and numbers indicated, this information cannot be verified. Give the voice command after verifying that the designated item has location information (i.e., that the item is on the map). A friend without any location information was specified. Give the voice command after verifying that the friend to be specified has location information (i.e, that the friend is on the map). Information for specifying friends could not be obtained from the voice recognition results. • Verify the link to the service provider that your designated friend uses (i.e., that service authorization has been completed) on the Config screen. • Give the voice command after verifying your friend who is to be specified. • Please check your setup and verify your friend. The friend indicated in the voice recognition results is not on the Friends list that was acquired within the application. Information for specifying friends whom you will be contacting could not be obtained from the voice recognition results. Sorry, this feature is for Twitter friends only. Please try again. 22 Action (Reference) Service providers other than Twitter were specified in the voice recognition results. Facebook is the service provider indicated by voice recognition results. • Verify that Twitter is linked to (i.e, that service authorization has been completed) on the Config screen. • Give the voice command after verifying that your designated friend is a Twitter user. Message Sorry, that Social Network Service isn’t supported. Please check your configuration. Cause Information critical for sending the message could not be obtained from the voice recognition results. Action (Reference) • Verify the link to the service provider that your designated friend uses (i.e., that service authorization has been completed) on the Config screen. • Give the voice command again. • Verify that Facebook and Twitter are linked to (i.e., that service authorization has been completed) on the Config screen. • Give the voice command after verifying that the designated service provider is Twitter or Facebook. • Verify that Twitter are linked to (i.e., that service authorization has been completed) on the Config screen. • Give the voice command after verifying that the designated service provider is Twitter. Sorry, that Internet Radio station isn’t supported. Unsuccessful in obtaining the information for designating the radio station servicer from the voice recognition results. Give the voice command after doublechecking the radio station you want to designate Sorry, your {Twitter/Facebook} account isn’t registered. Please check your configuration. Not linked to {Twitter/FaceBook}. • Verify that {Twitter/FaceBook} are linked to (i.e., that service authorization has been completed) on the Config screen. • Give the voice command again. Was not connected to the service provider designated by voice recognition results. • Verify that the designated service provider is linked to (i.e., that service authorization has been completed) on the Config screen. • Give the voice command again. 23 Message Cause Action (Reference) Sorry, your last destination isn’t set. Please set your destination. With no route established, there was no destination data, so rerouting could not be carried out. Give the voice command after setting up the route. Sorry, your destination isn’t set. With no route established, there was no route data to begin with, so no route deletion can be carried out. Give the voice command after setting up the route. Sorry, there are no New Messages. “Show Message” is stated in the absence of a new message. Give the voice command after having received the new message. Sorry, there are no recent stations. No broadcast stations have been listened to recently, so no list can be displayed. Give the voice command after playing the radio. Network error Message Sorry, your device is no longer connected to the Internet. 24 Cause Unit has been moved out of 3G/Wi-Fi communications range. 3G/Wi-Fi communications no longer possible. Action (Reference) Change locations or wait for a short amount of time until 3G/Wi-Fi communications are reestablished. Other errors Message Sorry, no account found. Please check your configuration. Cause Action (Reference) • The service provider is not linked to on Config. • Information regarding the service provider that is linked to cannot being obtained. • If there is an error message right after logging in, wait for a moment and then carry out the action again. • When there is an error message sometime other than right after login, verify that the service provider is linked to (i.e., that service authorization has been completed) on the Config screen. The number of Friends cases obtained from Zypr is zero. Verify that the SNS service provider is linked to (i.e., that service authorization has been completed) on the Config screen. Sorry, that attachment can’t be opened. Something other than the radio or POI was connected. Have the message resent after connecting the radio or POI. Sorry, that station can’t be found. Please try again later. The URL of the broadcast station was obtained from the Zypr server but it was not correct. Wait for a moment and then carry out the action again. Sorry, your list is full. Please delete an item. The number of registered Favorites has reached the maximum limit. • Friends: 30 • POI: 9 • Radio: 16 Delete the item from Favorites and, after creating space amongst the registered items, re-register the item in question. 25 Message Cause Action (Reference) Sorry, Zypr server is busy. Please try again later. There is no data to be registered. Wait momentarily and then retry the operation. The data obtained from Zypr did not contain anything. Wait momentarily and then retry the operation. Sorry, that item is already a Favorite. The data that you are trying to register has already been registered. Wait momentarily and then retry the operation. Sorry, your last destination isn’t set. Please set your destination. With no route established, there was no destination data, so rerouting could not be carried out. After setting up the route, try rerouting again. Sorry, I didn’t recognize the account. Please enter it again. The e-mail address (account) and password combination that was input is not correct. Double-check the account and password and then re-enter them. Sorry, I don’t see your Email Address. The Login button was pressed without any information entered for the input item Account (e-mail address). Input the account information and then press the button again. Please enter your email address. Sorry, I don’t see your Password. The Login button was pressed without any information entered for the input item Password. Input the password information and then press the button again. Sorry, I don’t see your First Name. The Sign Up button was pressed without any information entered for the input item First Name. Input item First Name information and then press the button again. 26 Message Cause Action (Reference) Sorry, I don’t see your Last Name. The Sign Up button was pressed without any information entered for the input item Last Name. Input item Last Name information and then press the button again. Sorry, I don’t see your Email Address. The Sign Up button was pressed without any information entered for the input item Account (e-mail address). Input the account information and then press the button again. Please enter your email address. Sorry, I don’t see your Password. The Sign Up button was pressed without any information entered for the input item Password. Input the password information and then press the button again. Sorry, I don’t see your Confirmed Password. The Sign Up button was pressed without any information entered for the input item Confirm. Input item Confirm (Password) information and then press the button again. Sorry, I need your Password to be more than 8 but less than 40 characters. The Sign Up button was pressed with less then eight characters being entered for the Password input item. Input a password containing at least eight but not more than 40 characters, and then press the button again. The Sign Up button was pressed with more than 40 characters being entered for the Password input item. Input a password containing at least eight but not more than 40 characters, and then press the button again. Sorry, I don’t think your Password and Confirmed Password match. The Sign Up button was pressed with nonidentical Password and Confirm (Password) input items. After verifying that Password and Confirm (Password) are identical, press the button again. 27 Message Cause Action (Reference) Sorry, BeSpoke doesn’t support your device. Please check Scion.com for compatibility. An iPhone 3G or some other incompatible device has been connected to the this unit. After verifying that the device in question is a compatible model that is registered on scion.com, try reconnecting the device. Sorry, there are no preset POIs. The POI search history returns zero hits. After performing a search for “Business search @nearby” using your iPhone, carry out the operations again using the on-board screen. Sorry, there are no results in the viewable area. The number of POI cases obtained from Zypr is zero. Select another category, or try again after moving to another part of the map. Sorry, your Friends List is empty. Please check your configuration. The number of Friends cases obtained from Zypr is zero. Verify that the SNS service provider is linked to (i.e., that service authorization has been completed) on the Config screen. Sorry, I couldn't find that genre. There aren't any stations in that genre. Select another genre, or wait a while and try again. Sorry, I couldn’t find those stations. The number of Radio Station cases obtained from Zypr is zero. Select another genre, or try again after waiting momentarily. 28 About location setting Sharing of your location is completely manageable by you. Make sure you follow these steps to take a full control of your location information. 1. iPhone setting is ON to allow access to your GPS location. NOTICE • When GPS is set to ON in the Location Services settings on your iPhone, the BeSpoke default setting is [Detect your location]. • When GPS is set to OFF in the Location Services settings on your iPhone, the BeSpoke default setting is [Hide your location]. 2. BeSpoke App setting is selected as “Detect your location” to update your GPS location. You can also set your location manually (“Set your location”) by setting the center of the current map as your location or hiding your location completely (“Hide your location”) so that your location cannot be found by your friends in the Friends List. 29 3. Select who you would like to share your location with. (Up to 30 accounts, e.g. If your friend has both Twitter and Facebook accounts and you add these accounts, then it counts as ‘two’) Select account Added friends NOTICE • Your location setting cannot be altered on an individual account basis. Once you select “Detect your location”, then you are revealing your location to every friend added by you here as well as services accessed through BeSpoke. 4. You will see your friends on the map. Make sure the Social bar is ON in order to see your friends. Social bar is ON Social bar is OFF NOTICE • There is no way of knowing on the BeSpoke app whether your friend’s location is the actual location of the Smartphone (GPS location) or a manually registered location. 5. Enjoy! 30 Compatible Device Models and Versions Compatible devices are iPhone 4, iPhone 4S and iPod Touch (4G) with an iOS of 5.0 or later. (As of February 23, 2012) Available Carriers Any carrier may be used with BeSpoke and it is also enabled for Wi-Fi. Disclaimer BeSpoke app requires iOS 5.0 or later on iPhone4, iPhone 4S with data plan or iPod touch (4th gen or newer; WiFi access required) Features of the BeSpoke app may be changed without notice. Zypr account registration required to access content and services. Must be at least 18 years old or have permission of a parent or legal guardian. Service available in the United States only. PIONEER and the Pioneer logo are registered trademarks of Pioneer Corporation. [1] Performance of Bluetooth ® compatible phones will vary based on phone software version, coverage, and your wireless carrier. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. [2] iPhone® is a registered trademark of Apple, Inc. All rights reserved. [3] iPod® is a registered trademark of Apple, Inc. All rights reserved. [4] App StoreSM is a service mark of Apple, Inc. All rights reserved. [5] ZYPR is a trademark of Pioneer Corporation. [6] Twitter ® is a registered trademark of Twitter Inc. [7] Tuner2 is a trademark of Media Tuners LLC. [8] Facebook is a registered trademark of Facebook, Inc. © 2012 Scion, a marque of Toyota Motor Sales, U.S.A., Inc. All rights reserved. Scion and the Scion logo are trademarks of Toyota Motor Corporation. 31 <KOKZX> <12E00000> <CVH-3918ZT> 32 <CRB4096-B> UC