1
Download McDATA OPENconnectors Command Line Interace User manual
Transcript
A Message Error 143: Domain RSCNs Must Be Enabled When Enterprise Fabric Mode Active Description The user attempted to disable domain RSCN's while enterprise fabric mode was active. Action Domain RSCN's must remain enabled while the enterprise fabric mode is active. If enterprise fabric mode is set to inactive, the domain RSCN state may be changed. It should be noted, however, that this can be disruptive to the fabric. Message Description Action Message Description Action Message Description Action Error 144: The SANtegrity Feature Has Not Been Installed The user attempted to activate a change to the fabric security configuration without first installing the SANtegrity feature key. If this key has not been installed, contact your sales representative. Error 146: Fabric Binding May Not Be Deactivated While Enterprise Fabric Mode Active The user attempted to deactivate fabric binding while enterprise fabric mode was active. Fabric binding must be active while operating in enterprise fabric mode. The fabric binding state may be changed if enterprise fabric mode is deactivated. It should be noted, however, that this can be disruptive to the fabric. Error 147: Cannot Complete Request While SW Trunking Is Enabled Cannot perform this action because the SW Trunking feature is enabled. Disable the SW Trunking feature. Error Messages A-21
