Download McDATA OPENconnectors Command Line Interace User manual

config
2
Purpose
Parameters
Command Example
This command sets the role value that is associated to an existing
username. The role value can either be set to an administrator or an
operator. This value defaults to “none” when the user is first added to
the database. This value must be changed for all new CLI and Web
users before they will be allowed access to their respective interfaces.
This command has two required parameters:
username
A valid Web or CLI username in the local
authentication database.
privilegeLevel
This parameter assigns the privilege level
to a username. Currently only Web and
CLI users can be assigned a role value.
This parameter must be either
administrator or operator.
Root> config security authentication user role
01:2A:3f:4:5:0:0 administrator
config.security.authentication.user.show
Syntax
Purpose
Parameters
show
interface
This command displays a single interface from the local
authentication database.
This command has one optional parameter:
interface
Command Example
Output Example
The interface that will be displayed.
Accepted values for this parameter are:
cli
web
api
eport
nport.
Root> config security authentication user show web
The output for the config.security.authentication.user.show
command displays as follows:
Interface: Web
2-50
Enterprise Operating System Command Line Interface User Manual