Download McDATA OPENconnectors Command Line Interace User manual
Transcript
A Message Description Action Message Description Action Message The feature key entered is invalid. Verify that the feature key was entered correctly and re-submit. Contact your service representative with further difficulties. Error 239: Fabric binding entry not found The user requested to remove a fabric binding entry that is not in the pending fabric membership list. Verify that the correct entry (both WWN and Domain ID) is being requested for removal from the list and re-submit the request. Error 240: Duplicate fabric binding member Description The user requested to add an entry to the fabric binding list that is already a member of the list. Action Verify that the correct entry (both WWN and Domain ID) is being requested for addition to the list and re-submit the request. Message Description Error 241: Comma-delimited mode must be active Comma-delimited mode must be active to execute this command Action Some commands require that comma-delimited mode be active (e.g. show.nameserverExt). Enable comma-delimited mode and re-issue the command. Message Error 244: Not allowed when Enterprise Fabric Mode is Active and Switch is Online Description This operation is not allowed while the switch is in Enterprise Fabric Mode and the switch is Online. Action A-38 Error 238: Invalid Feature Key Make sure Enterprise Fabric Mode is not enabled and the switch is offline. Enterprise Operating System Command Line Interface User Manual