Download RAD Data comm LA-210 Specifications

Transcript
Installation and Operation Manual
Chapter 5 Configuring a Flow-Based Point-To-Point Application
1. Set the CIR to 300 Kbps and the EIR to 200 Kbps (Figure 5-43).
2. For the SHDSL connection, navigate to the PCS menu (Configuration>Physical
Layer>SHDSL>PCS) and set the Egress Rate Limit to 1000 Kbps.
All green and yellow packets are forwarded. The red ones are dropped.
LA-210
Configuration>Applications>QoS>Bandwidth Profiles
1.
2.
3.
4.
5.
6.
ID[1 - 8]
Name
CIR(Kbps)[0 - 100000]
CBS(Bytes)[0 - 32000]
EIR(Kbps)[0 - 100000]
EBS(Bytes)[0 - 32000]
...
...
...
...
...
...
(2)
(BW_for_service_777)
(500)
(12176)
(200)
(12176)
>
a-Add; f-Forward; b-Backward; d-Delete
ESC-prev.menu; !-main menu; &-exit
1 M/ 1 C
Figure 5-43. Bandwidth Profile - CIR = 0.5 Mbps, EIR = 0.2 Mbps
Since the movie transmits at around 1.5 Mbps, CIR = 0.5 Mbps, EIR =
0.2 Mbps and the SHDSL port has been limited to 1 Mbps, all green (CIR)
and yellow (EIR) packets are forwarded and red packets are dropped
(Figure 5-44).
LA-210
*Monitoring>Application>Flows>CoS
Flow Name
...
Flow ID[1 - 8]
...
Fwd Green Packets
Fwd Yellow Packets
Dscrd Green Packet
Dscrd Yellow Packe
Dscrd Red Packets
(VLAN777-555)
(1)
(664)
(170)
(0)
(0)
(116)
1. CoS ID[0 - 7]
... (3)
>
f-Forward; b-Backward; c-Clear Statistics
ESC-prev.menu; !-main menu; &-exit
Direction
>
Fwd Green bytes
Fwd Yellow bytes
Dscrd Green bytes
Dscrd Yellow bytes
Dscrd Red bytes
(Upstream)
(926016)
(234260)
(0)
(0)
(159848)
1 M/ 1 C
Figure 5-44. CoS Statistics - CIR = 0.5 Mbps, EIR = 0.2 Mbps, Egress Rate Limit = 1 Mbps
LA-210 Ver. 1.5
Testing the Flow Based Configuration
5-25