1
Download SCAN 5-2 User guide
Transcript
Standard Finisher Plus Paper jams in areas 4b and 4c Tip Always ensure that all paper jams, including any small ripped pieces of paper, are cleared before proceeding with your print jobs. 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. 3. Move the levers 4b and 4c; remove the jammed paper. Note If paper is torn, check inside the machine and remove it. 4. Return the opened levers ( 4b and 4c) their original positions. 5. Close the right cover on the finisher. Note A message will display and the machine will not operate if the right cover is open even slightly. 24-28 User Guide
