Download Agilent Technologies E8403A Technical data

Using SCPI Interfaces
Using the E7501A SCPI Interface
SICL Interface Name
The SICL Interface Name is a symbolic name that SICL uses to uniquely
identify an instrument interface. If your application software uses SICL I/O
libraries, use this name and the Logical Unit number to address the
instrument interface properly.
SICL Interface names are set using the I/O Config utility of
Agilent I/O Libraries.
VISA Interface Name
The VISA Interface Name is a symbolic name that VISA uses to uniquely
identify an instrument interface. If your application software uses VISA I/O
Libraries, use this name to address the instrument interface properly.
VISA Interface names are set using the I/O Config utility of
Agilent I/O Libraries.
SICL Logical Unit
SICL Logical Unit is a number that SICL uses to uniquely identify this
Instrument interface. If your application software uses SICL I/O Libraries,
use this number and the SICL Interface name in order to address this
Instrument interface properly.
SICL Logical Unit numbers are set using the I/O Config utility of
Agilent I/O Libraries.
Address of Subsystem
Address of Subsystem is the address of the Agilent subsystem on the
VXI-11 interface emulated GPIB bus. Application software should address
the subsystem using this device address.
The Address of Subsystem is set in the Interface Selection dialog.
NOTE
Note that the default address of the subsystem is 0 when the VXI-11
interface is used.
Agilent E7501A Getting Started 3-37