Download E6701C Demonstration and Application Guide

Device Under Test Setup Table (DG Steps) for GMS/GPRS Devices
Motorola Timeport
Nokia 6310i
Siemens S45 / S46
P7389i
sent to phone, first
will scroll across,
then automatically
be replaced by the
second.
3. Press “C” (red) key
to delete a message.
4. Press “# >” key to
read message from
beginning
3. Message cannot be
read again unless it
is re-sent by Test
Set with higher
“Message Update
Number”
DG7:
To Enable SMS GSM Point-to-Point
1.
2.
Turn on the device
Turn on the phone
Turn on the phone
GSM SMS point-to-point setup
Menu, Messages,
Message Settings
1. Service Centre,
Enter Service
Centre Number: 1
2. Expiry Period,
Enter Hours: 24
3. Outgoing Message
Type, select Text
3.
Phone receives and reads
GSM SMS point-to-point
messages
Menu, Messages,
Received Messages,
scroll to select the
message to read
4.
Phone generates and
transmits GSM SMS point-topoint messages
Menu, Messages,
Message Editor
1. Enter text, then
press OK
2. Send Message;
Select? / OK
Menu, Messages,
Message settings,
Sending profile
1. Default profile
2. Message centre
number: 5555555
3. Messages sent as:
Text
4. Message validity:
24 hours
5. Default recipient
number: 1234567;
Options; Accept
6. Delivery reports:
No
7. Use GPRS: No
8. Reply via same
centre: No
When you see an
envelope symbol on the
display, you have a
message;
Menu, Messages,
Inbox, scroll to the
message, Select, read
message (select Options
to Erase the message)
1. Menu, Messages
2. Write message
3. Enter text, Options,
Send
4. Enter any phone
number, OK
 Copyright 2001-2003 Agilent Technologies.
Page 46 of 73
All Rights Reserved.
Part Number: 1000-1877
Release 1.2