Download Epson Powerspan User`s guide

Ll Place the diskette in the drive of another computer and
repeat the operation. If this works, the trouble may be in
your diskette drive. See “Diskette Drive Problems” below.
Cl
Make sure you enabled the built-in controller and selected
the correct diskette drive type(s) when you ran the SETUP
program or the EISA Configuration utility. See Chapters 2
and 3 for instructions.
Cl
If you cannot write to the diskette, make sure jumper E0291
is set to position 2-3 to enable writes to the diskette drive.
See Chapter 6.
Diskette Drive Problems
If you think there is something wrong with your diskette drive,
check this section.
You see an error message of have difficulty with a diskette
drive.
ci
If you removed your diskette drive and reinstalled it
yourself, review all the instructions in Chapter 7.
Li
Be sure that you ran the SETUP program or EISA
Configuration utility to enable the built-in diskette drive
controller and set the correct diskette drive type. See
Chapters 2 and 3 for instructions.
cl
If you are still having trouble with the drive, contact your
Epson dealer.
The diskette drive is making loud or unusual noises.
Contact your Epson dealer.
A-20 Troubleshooting