Download AML M3000 User`s guide

M3000 Bar Code Reader User's Guide
FUNC + SETUP
Setup Selection (Continued)
> Menu Level 1
> Menu Level 2
Bar Codes
(Continued)
Preamble
Postamble
➡
Menu Level 3
➡ Menu Level 4
Description (if required)
↵
Enter Preamble
Send Delay
0-31 char.
0.0s - 9.9s
Default = 0
0-31 char.
0.0s - 9.9s
Default = 0
↵
Enter Postamble
Send Delay
Bar Code Edit
↵
Editing
Lead Strip
Trail Strip
Space Strip
Code
ON/OFF*
0 - 30, 0*
0 - 30, 0*
ON/OFF*
(See description)
Default = ALL
Editing affects ALL Bar
Code types if ON, or the
Bar Code selected at the
Code option, No Bar
Codes are affected if
Editing is OFF.
Valid Bar Codes are: Code
39, UPC-A, UPC-E, EAN13, EAN-8, I 2 OF 5,
CODABAR, CODE 128,
CODE 93, MSI, CODE 11,
OR ALL.
Bar Code Beeper
↵
Tone
LOW-HIGHEST &
NONE
SHORTESTLONGEST
Default = MEDIUM
Timeout
1 Sec - 9 Sec & OFF
Default = 1
Trigger Off
Always Run
Read Delay
Bar Code ID
Dupli Reads
F1-F10 Keys
Specl Keys
ON*/OFF
ON/OFF*
1.0s - 0.9s
Default = 1.0
Length
Laser/CCD Opts
Other Options
> Menu Level 1
Transmit Setup
↵
↵
➡ Menu Level 2
➡ Menu Level 3
Data
MENU*/SEND ALL
Mode
Dialing
MENU*
KBD WEDGE
SER WEDGE
RS232 PORT
MODEM
TONE*/PULSE
Phone Number
(Enter Dialing Text)
Protocol
NONE*
XON/XOFF
XMODEM
Output
ASCII*
PCSCAN
Baud Rate
300
600
1200
2400
4800
9600*
19200
38400
7 or 8*
Data Bits
6-6
↵
Default = SHORT
ON/OFF*
ON*/OFF
ON/OFF*
ON/OFF*
Description (if required)
Press ENTER to save dialing text.