Download Qlogic iSR6152 User`s guide

B–Log Messages
Table B-1. iSR6152 Router Log Messages (Continued)
ID
Log Message
Module
Type
Msg.
Type
Description
74800
#%d: QLSetTargetData: No more room in
Target Database.
iSCSI
Error
Driver’s target database is full. Use the CLI or GUI to
remove unwanted/unused iSCSI targets.
75008
#%d: ql_process_error: OB_TCP_IOCB_RSP_W
returned DdbInx 0x%x pTpb %p
iSCSI
Error
A TCP retry for a frame failed on the connection
ddbIndex. Tpb contains the frame memory address.
86347
#%d: QLDisable: Restart RISC
iSCSI
Info
Restart iSCSI processor (RISC).
86349
#%d: QLEnable: Restart RISC to update
EEPROM
iSCSI
Info
EEPROM updated, restart iSCSI processor (RISC).
86874
#%d: QLIsrDecodeMailbox: Link up
iSCSI
Info
Link up reported by iSCSI processor for GE1 or GE2.
87346
#%d: QLGetFwStateCallback: link 100Mb FDX
iSCSI
Info
iSCSI controller reported a link speed/configuration
of 100Mb full-duplex (FDX).
87348
#%d: QLGetFwStateCallback: link 1000Mb
FDX
iSCSI
Info
iSCSI controller reported a link speed/configuration
of 1000Mb FDX.
87350
#%d: QLGetFwStateCallback: Invalid link
speed 0x%x
iSCSI
Info
iSCSI controller reported an invalid link speed.
102419
#%d: qlutm_init: Diagnostic failed, port 1
invalid SRAM
FC
Fatal
FC1 processor SRAM test failed.
102420
#%d: qlutm_init: Diagnostic failed, port 1
POST failed
FC
Fatal
FC1 processor power-on self-test (POST) failed.
102421
#%d: qlutm_init: Diagnostic failed, port 2
invalid SRAM
FC
Fatal
FC2 processor SRAM test failed.
102422
#%d: qlutm_init: Diagnostic failed, port 2
POST failed
FC
Fatal
FC2 processor POST failed.
ISR645610-00 B
B-17