Download CTM-200 online command reference

WikiPrint - from Polar Technologies
device priority n
A CTM configured for dual-mode (cell + wifi client, or cmd wlanenable 1), also requires a specification of the preferred WAN interface.
n = wifi
Wifi is the priority device (Default)
n = cell
Cellular is the priority device
Notes:
In a dual-mode cell + wifi client setup, where wifi is the priority device:
•
default route is set to wifi gateway
•
if wifi is not online, the cell interface will be the default route.
In a dual-mode cell + wifi client setup, where cell is the priority device:
•
default route is set to cell gateway
•
if cell is not online, the wifi interface will be the default route.
Examples:
1. Wifi has priority :
cmd device cell F5521E
cmd device wifi AR9271
cmd device priority wifi
cmd wlanenable 1
1. Cell has priority :
cmd device cell F5521E
cmd device wifi AR9271
cmd device priority cell
cmd wlanenable 1
See also: [Cellular], [Wi-Fi Networks]
Firmware revision 2.0.4.2360
62