Download iQ Sensor Solution Reference Manual

CC-Link
The following shows the devices supporting iQSS, iQ Sensor Solution functions, and supported version available for CC-Link.
■Mitsubishi Electric Corporation
: Supported, : Not supported
Type
Model name
module*1,*2
L26CPU-BT*3,
iQ Sensor Solution function
L26CPU-PBT*3












LJ61BT11*4






QJ61BT11N*5






Analog input module (voltage/current input)
AJ65SBT2B-64AD*6






Analog input module
(Temperature input)
RTD
AJ65SBT2B-64RD*7
Thermocouple
AJ65SBT2B-64TD*8
CC-Link master/local
Analog output module (Voltage/Current
output)
*1
*2
*3
*4
*5
*6
*7
*8
*9
AJ65SBT2B-64DA*9
The data backup/restoration function is supported by the module with a serial number of which the first five digits are '14112' or higher.
The module with a serial number of which the first five digits are '15052' or higher supports the devices connected to communication unit
for CC-Link.
The module with a serial number of which the first five digits are '16042' or higher supports the devices supporting iQSS, which are
connected to Bridge module (NZ2AW1C2AL).
The module with a serial number of which the first five digits are '15052' or higher supports the devices supporting iQSS, which are
connected to Bridge module (NZ2AW1C2AL).
The module with a serial number of which the first five digits are '17012' or higher supports the functions.
The module with a serial number '1211DB' or higher supports the functions.
The module with a serial number '1211DC' or higher supports the functions.
The module with a serial number '1211BC' or higher supports the functions.
The module with a serial number '1211GC' or higher supports the functions.
■Panasonic Industrial Devices SUNX Co., Ltd.
: Supported, : Not supported
Type
Model name
Communication unit for CC-Link
SC-GU3-01*1
Analog input unit
*2
FX-301*3, FX-305, FX-501, FX-502
Digital laser sensor*2
LS-403
Head-separated dual display digital pressure
sensor*2
DPS-401, DPS-402
*2
*3












SC-T1JA, SC-A01, SC-A02
Digital fiber sensor*2
*1
iQ Sensor Solution function
The products manufactured from December, 2012 onward support the functions.
A cascading connector unit (SC-71) is required separately.
An end unit (SC-GU3-EU) is required separately.
Use the dedicated software (SC-PC1) to configure the required settings.
The unit/sensor supports each function by being connected to a communication unit for CC-Link (SC-GU3-01).
A sensor head is required separately.
The products manufactured from June, 2004 onward support the functions.
APPENDICES APPENDIX
Appendix 2 List of Device that Supports iQ Sensor Solution
171
A