Download - CyberResearch

Transcript
CM 7013, M-7015
2.7 $AA0Ci
Description:
Performs a zero calibration on the specified channel.
Syntax:
$AA0Ci[CHKSUM](CR)
$
Delimiter character
AA
Address of the module to be calibrated (00 to FF)
0
Command for the zero calibration
Ci
Specifies the channel to be calibrated
Response:
Valid Command: !AA[CHKSUM](CR)
Invalid Command: ?AA[CHKSUM](CR)
!
Delimiter character for a valid command
?
Delimiter character for an invalid command.
An invalid command is returned if the specified
channel is incorrect.
AA
Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
56
CM 7013/15/33, M-7015/33 User’s Manual, Rev: B1.7 7PH-008-B17