Download Sensor Board User Manual
Transcript
Sensor Board User Manual Using the PC software, the user can create their own mapping for these outputs, which will remain in effect for as long as the board is connected to the computer. Persistent changes to the output configuration require modification of the firmware, either by directly editing the default code or by creating user written code. The I2C and RS-232 terminals provided allow the board to communicate with other devices using these protocols; however, this requires the user to implement their own code as there is currently no sample code provided for initializing and using these features. The last major functional feature in the PIC module is the analog/digital configuration switches for the five configurable inputs. In order to select a configuration, the user can simply read the table included on the board which instructs which switch settings will enable the various available configurations. In order for the analog to digital conversion feature of microcontroller to provide usable output, the user must first set the +/reference voltages. It should be noted that this setting will apply to both the analog sensor inputs, as well as the configurable inputs that are set by the user to be analog. Personal Mechatronics Lab 33