Download IM Manual 2/18/04

Chapter 9: Installing Upgrades
Adding Stations
You can add stations to your IM controller.
1. Purchase station output card(s) (four stations per card) corresponding to the number of stations you would
like to add to the IM controller. You may need to purchase an additional output box as well. Each box can hold
four station output cards (sixteen stations).
2. Turn off the power switch.
3. Open the controller’s coverplate (inner door).
4. Loosen the retaining clips on either side of the CPU box and remove the CPU box from the controller.
5. Remove the shelf beneath the station output boxes.
82