Download MX Sheet Version 2 Operating Manual

CHAPTER 6 CELL SETTING
(b) "Device"
Enter the device or label used for the device trigger.
• When entering a device, enter a device name and device number in this order.
• When entering a label, enter the label name.
• The applicable data types are Bit and Word.
• When entering a label, enter other than structured data type label and array type label.
• When inverter communication setting/robot controller communication setting is set to the logical station
number, input the monitor type of inverter/robot controller in decimal number.
(c) "the bit"
Set the corresponding bit of the word device.
Setting range: 0 to 15
(d) "Condition"
Set the device trigger condition.
Item
When ON
Available Device
Bit device
ON
Word device
OFF
When OFF
Bit device
ON
Word device
OFF
ON
Bit device
ON
Word device
OFF
Bit device
ON
Word device
OFF
=
<>
<=
<
>=
>
Range
6
Set when operation is to be performed only once when the bit device turns on.
Set when operation is to be performed only once when the corresponding bit of the word
device turns on (value: 1).
Set when operation is to be performed only once when the bit device turns off.
Set when operation is to be performed only once when the corresponding bit of the word
device turns off (value: 0).
Set when operation is to be performed while the bit device is on.
Set when operation is to be performed while the corresponding bit of the word device is
on (value: 1).
Set when operation is to be performed while the bit device is off.
Set when operation is to be performed while the corresponding bit of the word device is
off (value: 0).
Word device,
Set when operation is to be performed when the device value is equal to the "Value"
Double word device
setting.
Word device,
Set when operation is to be performed when the device value is not equal to the "Value"
Double word device
setting.
Word device,
Set when operation is to be performed when the device value is equal to or less than the
Double word device
"Value" setting.
Word device,
Set when operation is to be performed when the device value is less than the "Value"
Double word device
setting.
Word device,
Set when operation is to be performed when the device value is equal to or greater than
Double word device
the "Value" setting.
Word device,
Set when operation is to be performed when the device value is greater than the "Value"
Double word device
setting.
Word device,
Set when operation is to be performed when the device value is within the specified
Double word device
"Value" setting range.
55
6.2 When "Logging" is Selected
6.2.4 Setting of the <<Device Trigger>> tab
OFF
Description