Download DeCyder 2D Software, Version 7.0

DIA (Differential In-gel Analysis) Module 4
6
After the filter parameters have been established, select Process:Exclude
Filter (or select the icon from the toolbar) to display the Exclude Filter dialog.
Enter the values as determined above and then click OK.
Note: Check Filter confirmed spots to allow the exclude filter to exclude
already confirmed spots that fall within the selected exclude filter
values.
The Exclude Filter will automatically exclude detected spots on the basis of
these values. If an area of interest has been defined, the spots outside of
the area of interest will also be removed. Excluded spots are by default
displayed with a gray spot boundary.
Note: Excluded spots are not removed from the DIA workspace, they are only
hidden. However, if using the DIA workspace in the BVA module, the
excluded spots in the DIA workspace cannot be analyzed.
Note: The excluded spots can be returned to the experiment by deselecting the
check boxes in the Exclude Filter dialog and then re-running the filter.
Alternatively, the values in the exclude filter can be edited, followed by rerunning the filter.
DeCyder 2D 7.0 User manual 28-9414-47 Edition AA
77