Download DPA 5 User Manual

DPA 5 Series Installation and User Manual
2.2.
Standards and Protocols Supported
The adapter you have purchased provides more protocol and standards support than any other commercially
available diagnostic adapter.
2.2.1. Operating Systems and Standards Supported

Operating Systems
o
Windows 2000®
o
Windows XP®
o
Windows Vista® 32-bit and 64-bit Versions
o
Windows 7® 32-bit and 64-bit Versions

TMC RP1210C, RP1210B, TMC RP1210A

SAE J2534-1, J2534-2

CE Certification

Vehicle Electronic Programming Station (VEPS) J2214/J2461
2.2.2. RP1210 Defined Protocols Supported


J1939
o
J1939@250k – Standard J1939
o
J1939@500k – Per J1939/14
o
Automatic Baud Rate Detection Capable
CAN (ISO11898)
o

Automatic Baud Rate Detection Capable
CAN@500k/J2284/GMLAN
o
The IESCAN protocol name is also CAN@500k.
o
Automatic Baud Rate Detection Capable

J1708/J1587

J1850 GM (Class 2)
o
The following protocol names are supported: J1850, J1850_416K, J1850_104K. The send and read
message format was changed from RP1210A to RP1210B for this protocol. We support both formats.
The J1850 protocol name indicates the RP1210A format for sending and reading data. The
J1850_416K, J1850_104K names indicate the RP1210B format.

ISO 9141-2

ISO 14230 (KWP2000)
Page 9 of 61
© 2010-2013 Dearborn Group, Inc.