1
Download DMP40, DMP40S2
Transcript
Instruction set for the HBM Interpreter ➝ Communication G38 PPM Parallel Poll Mode Inputting the parallel poll response (IEEE488 only) Syntax: PPM p1(x) Parameters: p1 Effect: 0 No parallel poll response ( Sense = 1) 1−8 Parallel poll response (Sense = 1) 9 − 16 Parallel poll response (Sense = 0) 17 No parallel poll response (Sense = 0) Indicates on which data line and at what level the device answers in the event of parallel polling. This command must be used instead of the IEEE interface commands PPE and PPD. Response: Operation with computer or terminal Acknowledgment Meaning 0 Command has been executed ? Error
