Download DMP40, DMP40S2

Transcript
HBM Interpreter commands ➝ Amplifier setups
Example 1:
G83
LIV1,1,2,3840000,−3840000(x)
0(y)
Limit value switch 1 is set to limitvalue monitoring, source S2 and swit
ching points +50% (closer) or 50% (opener).
Note:
With the following equations, you can convert the switching points into
ADU units
Switching point (ADU units) =
7 680 000 x switching point (unit)
Final value of measuring range (unit)
Operation with computer or terminal