1
Download PDF - UNT Digital Library
Transcript
Figure C20. System Configuration that if the manual interface is slow to respond, check the Dwell time on the init tab. It should be set to something less than 1 second in order for the user interface to respond in a normal, quick fashion. You can control the voltage setting on the power supply through the Energy (eV) control or the increment and decrement controls. If you use the Energy (eV) control, you must press SET to activate the voltage. The indicators to the right of these show the actual voltage setting in eV and volts. When you click Done , you will prompted to turn off the X-Ray source. 264
