Download Eddy-DK v2.5.1.1 Programmer Guide

Eddy DK Programmer Guide
6.10 Debugging Function
Eddy can debug operating condition of each application via Telnet in real time.
The following functions are used to print debug log message to Telnet window when SB_DEBUG of each application
is set ON.
SB_LogDataPrint
Function
Print each byte of data in hex or ascii code.
Format
void SB_LogDataPrint (char *RTx, char *buff, int data_len);
Parameter
*RTx
Description message of data
*Buff
Buffer address of data to be printed is saved/
Data_len
Size of data.
None
Prints messages to telnet which logged in first.
The message include Eddy’s tick counter of 1msec unit and printed in
following form.
SB_LogDataPrint (‚Send‛, ‚\t12345\n‛, 8);
[191020202] Send 8
= 08,1,2,3,4,5,0d,0a
-------------- ------- ---------------------------Tick Counter
RTx
data_Len buff
Debugging of each application in Eddy can be configured as follows by
using Def command. (Please see def.c)
# def po <1/2/all> debug <on/off>
Returns
Notice
SB_LogMsgPrint
122
Function
Prints in the same format as Printf.
Format
void SB_LogMsgPrint (const char *Format, . . . );
Parameter
Returns
Notice
*Format
Format of Printf
None
Prints messages to telnet which logged in first.
The message include Eddy’s tick counter of 1msec unit and printed in
following form.
SB_LogMsgPrint (‚%s means Real-Time\n‛, ‚Eddy‛);
[191020202] Eddy means Real-Tile
Debugging of each application in Eddy can be configured as follows by
using Def command. (Please see def.c)
# def po <1/2/all> debug <on/off>