Download User Manual for Embedded System Environment

User Manual for Embedded System Environment:
ESE Version 2.0.0
</Operation>
</ExecModel>
<DPModel>
<Pipeline name = "default" br_pred_policy = "TAKEN" br_pred_hit_ratio = "100.00" br_penalty = "0">
<Stage name = "SINGLE">
<FURef type = "reg" quantity = "32"/>
<FURef type = "mem-Port" quantity = "1"/>
<FURef type = "int-ALU" quantity = "1"/>
<FURef type = "int-Mult/Div" quantity = "1"/>
<FURef type = "logic-SHIFT" quantity = "3"/>
<FURef type = "FP-ALU" quantity = "1"/>
<FURef type = "FP-Mult/Div" quantity = "1"/>
</Stage>
</Pipeline>
<FuncUnit type="reg" quantity="32">
<OperMode mode="RdReg" oplat="1"/>
<OperMode mode="WrReg" oplat="1"/>
</FuncUnit>
<FuncUnit type="mem-Port" quantity="1">
<OperMode mode="RdPort" oplat="1"/>
<OperMode mode="WrPort" oplat="1"/>
</FuncUnit>
<FuncUnit type="int-ALU" quantity="1">
<OperMode mode="IntALU" oplat="1"/>
</FuncUnit>
<FuncUnit type="int-Mult/Div" quantity="1">
<OperMode mode="IntMult" oplat="3"/>
<OperMode mode="IntDiv" oplat="20"/>
</FuncUnit>
<FuncUnit type="logic-SHIFT" quantity="3">
<OperMode mode="shift" oplat="1"/>
</FuncUnit>
<FuncUnit type="FP-ALU" quantity="1">
<OperMode mode="FPAdd" oplat="2"/>
<OperMode mode="FPCmp" oplat="2"/>
<OperMode mode="FPCvt" oplat="2"/>
</FuncUnit>
<FuncUnit type="FP-Mult/Div" quantity="1">
© 2008, CECS
112