1
Download Section 1 - Community Transit
Transcript
Description Type Length Format Mandatory a. Booking id char 6 char 10 char 16 X char 5 X char 20 char 8 integer 3 X char 9 X char 100 Identifies a booking. Bookings describe circumstances when different service levels are required. b. Schedule type id Identifies the day or days covered by the schedule. c. Trip Identifies the trip that was measured. d. Route Identifies the route of the trip that was measured. e. Direction Identifies the direction of the trip that was measured, as it appears in HASTUS (e.g. “Clockwise”, “North”). f. Block Identifies the block of the trip that was measured. g. Stop rank Identifies the rank of the stop where the measurement was recorded. Stop rank must be greater than or equal to 0, and rank 0 must correspond to the first stop of the trip. h. Stop id Identifies the stop where the measurement was recorded. Mandatory for a measurement used in Rider or when Location is not specified. i. Stop description Identifies the description of the stop. j. Scheduled time integer 6 hhmmss char 8 Uses HASTUS settings Identifies the scheduled arrival time at the stop. k. Measure date Identifies the date the measurement was recorded. X ©GIRO Inc. 2005 2 ATP-Rider measurement input interface ATP-Rider_Eng (Printed on: (2005-12-23)
