Download Type SW0D5C-ACT-E ActiveX Communication

Transcript
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
MELSEC
6.4 CPU USB Communication
This section provides the CPU USB communication procedure and its setting example
using the utility setting type.
6.4.1 Accessing procedure
The procedure for making access to the PLC CPU using CPU USB communication will
be explained in the following order.
START
Connect the PLC CPU and IBM-PC/AT compatible.
Refer to Chapter 2.
Start the communication setup utility and make
setting on the communication setting wizard.
Refer to Section 6.4.1 (2).
On the communication test screen, check whether
communication can be made properly.
Refer to Section 6.4.1 (3).
END
(1) System example
The following system example is used in this section.
Q02H Ordinary station
(Sta. No.2)
CPU
MELSECNET/10H
(Network No. 1)
IBM-PC/AT compatible
(ACT) USB is used.
Q02H Ordinary station
(Sta. No.8)
CPU
Logical station number of "4" is used.
6 - 32