Download SnapSAN AutoTier User Guide
Transcript
Chapter 1 Overview of Performance Optimization Function Operation flow Reference Monitoring and analyzing the load state of a node Monitor and analyze the load status of a node by using the performance monitoring function and the performance analysis function, and check whether a bottleneck exists on node resources. If a bottleneck is found, analyze business on the node and determine the business to be moved. “Performance Monitoring User’s Manual” “Performance Analysis User’s Manual” Adding a node Add a node. Binding a pool to the added node Bind a pool in which a Work Disk for Optimization is placed to the added node. Preparing a Work Disk for Optimization Bind a logical disk that will be a Work Disk for Optimization in the bound pool, and add the attribute of the Work Disk for Optimization. Replacing Execute replacement, handling the prepared Work Disk for Optimization as the destination of movement. “Configuration Setting Tool User’s Manual (GUI)” “Placement of Work Disks for Optimization” “Configuration Setting Tool User’s Manual (GUI)” “LD Administrator User’s Manual” 2.3.2 1.5.4 “Performance Tuning” 3.2 “Operation on Screen” 4.1 “Logical Disk Movement Command” Appendix A “Command of Performance Optimization Function” Verifying performance of the logical disk after replacement Verify that the replacement produces the expected result by using the performance monitoring function and the performance analysis function. 10 “Performance Monitoring User’s Manual” “Performance Analysis User’s Manual”