Download User Manual - Excalibur Engineering

Transcript
Connecting to the Logic Analyzer
Use the tables and figures in the following sections to connect the
logic analyzer pod cables to the flexible cable assemblies on the
preprocessor interface. Refer to the pod diagram for the analyzer you
are using. The configuration file for the logic analyzer is listed below
the corresponding connection table.
To connect to the 1660A/AS/C/CS logic analyzers
Use the table below to connect the preprocessor to the Agilent Technologies
1660A/C logic analyzers.
1660A/C Pod
Pod 1
Pod 2
Pod 3
Pod 4
Pod 5
Pod 6
Pod 7
Pod 8
E2457A
Connector
P1
STAT
clk ↑
P2
STAT
P3
ADDR
P4
ADDR
P5
DATA
P6
DATA
P7
DATA_B
P8
DATA_B
Configuration File
Use configuration file CP55C_3 for the Agilent Technologies 1660A/AS/C/CS
logic analyzers.
Preprocessor Interface for the Pentium Processor
1-13