Download 1405-D - User Manual
Transcript
S ECTION 4 SCREENS AND SETTINGS Instrument Temperatures Screen The Instrument Temperatures screen (Figure 4-14) shows the current temperatures of the unit. Figure 4-14. Instrument Temperatures screen. The Instrument Temperatures screen contains the following control buttons: 4-18 OPERATING GUIDE, TEOM 1405-D • Cap temperature. This field contains the current value of the temperature (°C) of the mass transducer’s cap. The default setting is 30° C. To view or adjust the setpoint, select the button to display the keypad (Figure 4-3). DO NOT adjust this value without contacting Thermo Scientific. • Case temperature. This field contains the current value of the temperature (°C) of the mass transducer case. The default setting is 30° C. To view or adjust the setpoint, select the button to display the keypad (Figure 4-3). DO NOT adjust this value without contacting Thermo Scientific. • PM-2.5 air tube temp. This field contains the current value of the temperature (°C) of the PM-2.5 air stream. The default setting is 30° C. To view or adjust the setpoint, select the button to display the keypad (Figure 4-3). DO NOT adjust this value without contacting Thermo Scientific. • PM-Coarse air tube temp. This field contains the current value of the temperature (°C) of the PM-Coarse air stream. The default setting is 30° C. To view or adjust the setpoint, select the button to display the keypad (Figure 4-3). DO NOT adjust this value without contacting Thermo Scientific. THERMO FISHER SCIENTIFIC