1
Download - BarcodeMan
Transcript
HHD II 4 First Start-Up Connect device to Host with USB cable LED blinks Load drivers (if requested) LED off Disconnect reader at Host YES Connect external power supply to cable and power up BEEP OK Does a dialog box appear asking whether Bus power is sufficient? NO LED off - BEEP OK Select desired USB interface code Reconnect reader cable to Host and close dialog box Load drivers (if requested) Read test codes. Reader is READY Successive start-ups will automatically recognize the previously loaded drivers. If external power is used, verify that external power is already supplied. Successive Start-Ups Connect device to Host with USB cable Disconnect reader at Host Connect external power supply to cable and power up YES LED blinks Does a dialog box appear asking whether Bus power is sufficient? NO LED off - BEEP OK BEEP OK 118 Reconnect reader cable to Host and close dialog box Read test codes. Reader is READY
