Download Beginner`s Manual

Transcript
Creating the Project Data
Example Setting the Object Function
Settings (Device/Style tab):
● Lamp type: Bit
● Device: M0
Settings (Text tab):
● Device: M0
● Font: 16dot Standard
Settings (Extended tab):
● Layer: Front
Click the ON button to check the attributes of ON time.
A text can be registered in each display position (Center, Top, Bottom, Left, Right). The textregistered display position button is displayed in purple characters.
When the settings are completed, click the OK button.
Fig. 3-42:
Bit Lamp after making settings
This completes the setting of the first Lamp.
When creating the second Lamp or later, select the set Lamp and then select the Edit Consecutive Copy menu to display the Consecutive Copy dialog box.
Fig. 3-43:
Consecutive Copy dialog box
Example Set data:
● Number: X: 4
● Interval (Dot): X: 10
GT Designer3 Beginner's Manual
3 - 23