1
Download MicroLogix 1200 Programming Manual
Transcript
Process Control Instruction Input Parameters 319 The table below shows the input parameter addresses, data formats, and types of user program access. See the indicated pages for descriptions of each parameter. Input Parameter Descriptions Address Data Format Range Type User Program Access For More Information SPS - Setpoint PD10:0.SPS word (INT) 0 to 16383(1) control read/write 320 PV - Process Variable user defined word (INT) 0 to 16383 control read/write 320 MAXS - Setpoint Maximum PD10:0.MAXS word (INT) -32,768 to +32,767 control read/write 320 MINS - Setpoint Minimum PD10:0.MINS word (INT) -32,768 to +32,767 control read/write 321 OSP - Old Setpoint Value PD10:0.OSP word (INT) -32,768 to +32,767 status read only 321 OL - Output Limit PD10:0/OL binary 1 = enabled 0 = disabled control read/write 322 CVH - Control Variable High Limit PD10:0.CVH word (INT) 0 to 100% control read/write 322 CVL - Control Variable Low Limit PD10:0.CVL word (INT) 0 to 100% control read/write 323 (1) The range listed in the table is for when scaling is not enabled. With scaling, the range is from minimum scaled (MINS) to maximum scaled (MAXS). Publication 1762-RM001F-EN-P - October 2009
