1
Download MicroLogix 1200 Programming Manual
Transcript
572 Knowledgebase Quick Starts Micrologix 1000 (Node 4) Ladder Logic No ladder logic is required in the destination processor, however the communications channel must be configured to match the source processor. Since the default settings for the ML1500 communications channel is DF1 protocol, 19,200 Kbaud the ML1000 must be configured to match. (See Below) Micrologix 1000 Channel Configuration Important Note:After the ladder logic has been entered into the ML1500 and the ML1000 channel configuration has been changed, in order for this example to function connect the controllers using a 1761-CBL-HM02 cable, leave connected until the COMM 0 LED on the ML1500 starts to blink. Verifying data has been sent: Publication 1762-RM001F-EN-P - October 2009
