Download User Manual for SifoWorks D

Chapter 3 Network Configuration
OD1300UME01-1.3
3.4 Setting up DHCP Service
You must perform this configuration to set up SifoWorks to provide DHCP
services by either setting up SifoWorks as a DHCP server or using the
system as DHCP relay servers.
DHCP Server
A DHCP server dynamically assigns and manages IP addresses and other
related parameters such as DNS, WINS and gateway to external hosts.
DHCP Relay Server
DHCP relay servers point to a DHCP server located in another subnet,
allowing the server to provide DHCP service to hosts on this subnet.
Note that your system’s basic network configurations should already be
properly set up. Please refer to “3.2 Setting up the Basic Network
Settings” for information on configuring SifoWorks’ basic network settings.
APPLICATION EXAMPLE 1 – DHCP SERVER
As shown in the figure below, SifoWorks provides DHCP services to the
LAN network.
User Manual for SifoWorks D-Series Firewall
69