Download 4 - Varec, Inc.

Local Diagnostic Interface
• If you only have Level 1 LDI security, the LDI prompts you to confirm the change. Press
<Y> to proceed or <N> to cancel the edit.
7.
The LDI changes the point.
Listing Points
You can get a list of all the 8130 RTU points by using the LDI List Points function. This function
lists each point. It also shows a point’s tag if one exists. To list points using the LDI screen:
Viewing a list of all points
1.
From the main menu, press <L>. The system lists the 8130 RTU database points.
DI.0:
DI.2:
DI.4:
DI.6:
Pump1
Pump3
Pump Backup
Reserve Pump
Figure 10-10:Point List
2.
Press <ENTER> to scroll through the points. If a tag exists, the LDI displays it with the point.
Edit Tags
From the LDI, you can edit points in the 8130 RTU by referring to their tag. To change an existing
tag:
Edit points via their Tag
1.
From the main menu, press <T>. The LDI screen lists the existing tags.
1
2
3
#
Pump1
Pump2
Pump3
to edit:
Figure 10-11:Tag List
158
2.
Press <ENTER> to scroll through the tags.
3.
When the tag you want to edit appears on the screen, press the number to the left of the
tag you want to change. The tag information appears. From this screen you can change
point data just as you can when you edit a point.
Installation and Operations Manual