Download Operator`s Manual
Transcript
ARCHANGEL SECTION 6 Regn User Defined Region The Page allows a region to be defined for the unsteadiness detection algorithm. Select Area The area of the image to lock to may be selected using this control. This is very useful in situations where multiple moving objects are present within the picture, allowing the user to select which area to stabilize. Whole Screen Letterbox Centre Only Reject Centre User Top/Bottom/Left/Right This allows a user selection area of rectangular shape to be defined. There are 8 blocks vertically and 10 blocks horizontally. Using ‘top’ you can select which of the 8 rows vertically is the top of the selected rectangle. Similarly, bottom, left and right allow you to define the bottom, left and right of the box. For example: Person Only Top = 3 Selected Area Reject Person Right Only Left Only Top Only Bottom Only Bottom = 8 Left = 3 Right = 10 Overlay An overlay can be added to the output of the unit to show the approximate area of the input image that the unsteadiness process is using to calculate the unsteadiness. This is particularly useful when setting up the user defined region. User Invert The selection may be inverted using this selection. In this case only the blocks outside the defined area will be active, for example: Selected with Invert Note that Correction is disabled when the overlay is on the screen. Top = 3 Bottom = 8 Left = 3 ARCHOP 171104 www.snellwilcox.com Right = 10 Version 1 Issue 4 6.5