1
Download Manual - Proware
Transcript
iSCSI GbE to SAS/SATA II RAID Subsystem ERROR ERROR ERROR ERROR ERROR ERROR ERROR INFO INFO INFO INFO SATA PRD mem fail SATA revision id fail SATA set reg fail SATA init fail SATA diag fail Mode ID fail SATA chip count error SAS port reply error SAS unknown port reply error FC port reply error FC unknown port reply error Failed to init SATA PRD memory manager Failed to get SATA revision id Failed to set SATA register Core failed to initialize the SATA adapter SATA Adapter diagnostics failed SATA Mode ID failed SATA Chip count error SAS HBA port <number> reply terminated abnormally SAS frontend reply terminated abnormally FC HBA port <number> reply terminated abnormally FC frontend reply terminated abnormally EMS events Level INFO ERROR INFO ERROR WARNING INFO ERROR INFO ERROR ERROR WARNING ERROR ERROR Type INFO WARNING ERROR ERROR Power install Power absent Power restore Power fail Power detect Fan restore Fan fail Fan install Fan not present Fan over speed Thermal level 1 Thermal level 2 Thermal level 2 shutdown Thermal level 2 CTR shutdown Thermal ignore value Voltage level 1 Voltage level 2 Voltage level 2 shutdown Voltage level 2 CTR shutdown UPS OK UPS fail UPS AC loss UPS power low WARNING SMART T.E.C. WARNING SMART fail ERROR WARNING WARNING ERROR ERROR ERROR Description Power(<string>) is installed Power(<string>) is absent Power(<string>) is restored to work. Power(<string>) is not functioning PSU signal detection(<string>) Fan(<string>) is restored to work. Fan(<string>) is not functioning Fan(<string>) is installed Fan(<string>) is not present Fan(<string>) is over speed System temperature(<string>) is higher. System Overheated(<string>)!!! System Overheated(<string>)!!! The system will auto-shutdown immediately. The controller will auto shutdown immediately, reason [ Overheated(<string>) ]. Unable to update thermal value on <string> System voltage(<string>) is higher/lower. System voltages(<string>) failed!!! System voltages(<string>) failed!!! The system will auto-shutdown immediately. The controller will auto shutdown immediately, reason [ Voltage abnormal(<string>) ]. Successfully detect UPS Failed to detect UPS AC loss for system is detected UPS Power Low!!! The system will auto-shutdown immediately. Disk <slot> S.M.A.R.T. Threshold Exceed Condition occurred for attribute <string> Disk <slot>: Failure to get S.M.A.R.T information User Manual 135
